How does the Saflok HH6 programmer get charged?

The Saflok HH6 Programmer is a handheld device to program and troubleshoot Saflok system door locks.

After I checked the Saflok HH6 Programmer user manual, it says Saflok HH6 Programmer uses 3 NiMH rechargeable Batteries and comes with a charge Base.

To use Saflok HH6 Programmer: 

1. Your Saflok HH6 Handheld Programmer should be shipped with all the batteries installed and a pull tab inserted in the battery case.
2. If the tab is there, pull the tab out and discard it. The Terminal should then display a POWER-UP MENU.
3. If you were shipped separate batteries, remove the Handheld Terminal from the Base and open the battery cover.
4. Insert the (3) batteries carefully, noting the proper +/- directions.
5. Replace the battery cover and reinsert the Terminal into the charge Base.

So, if you want to charge your Saflok HH6 Programmer, just put the Saflok HH6 Terminal into the Base, then it will be charged.

For more information about Saflok door lock system problems and troubleshooting, you can check the Saflok HH6 Programmer user manual and this article: Saflok Troubleshooting: Comprehensive and Detailed Guidance.